Summer Safety Alert: Electric Shock Drowning
Posted by Steven Ellis As the dog days of summer arrive, we are at the height of sunscreen, popsicle, and watersport season. Everyone has a different way to cool off from the […]
Shock Alert Blog
Raising Awareness to Electric Shock Drowning Surrounding Tragedy in North Carolina
by: Steve Udelson CHARLOTTE, N.C. – Electric shock drowning is a serious danger in freshwater swimming and boating areas, but many people have never heard of it. Chief meteorologist Steve […]
Electrical Shock Results in Harveys Lake Drowning
BILL WELLOCK HARVEYS LAKE — Authorities identified the man who drowned in an accident at Harveys Lake on Thursday as Dakota Watkins, 24, of Tunkhannock. Luzerne County Coroner Bill Lisman […]
The danger of electrical shock drownings
Check out this video segment featuring Shock Alert, LLC as a solution for testing pools and lakes. Shock Alert is a device, designed to detect electrical voltage in water and […]
ELECTRIC SHOCK DROWNING: BOATING AND MARINA ELECTRICAL SAFETY RESOURCES
Helpful tips reduce the risk of electric shock drowning and boating electrical hazards. With summer in full swing, the American National Fire Protection Association (NFPA) and Electrical Safety Foundation International […]
Lake Of the Ozarks Dock Water Electrocutions force Moms to Fight for New Laws
According to KMBC.com The Lake of the Ozarks is a popular summertime destination in the heart of Missouri, but for one family, it’s a sad reminder of loss. Alexandra Anderson, […]
At Final Word Inspection Service we have used shock alert when inspecting pools, hot tubs and dock. in 2018 we found 4 dock that had electrical current bleeding into the water all of which would have cause ESD if not detected. We found defective GFCI’s, boat dock lift pump shorts, deteriorated OS cable, faulty boat wiring, improper grounding, the list goes on. We recommend to our clients to purchase the Shock Alert along with a good GFCI tester and always recommend to have a licensed electrical company to come annually to replace any devices that become weathered.
Anyone having a dock with electricity to it, or a hot tub should get a shock alert.
We recently purchased one of your units for our Yacht Club to do testing at our pedestals. Can you tell me anything about the level of current that shockalert is detecting at each stage of the red LED’s flashing and audible alarm sounding?
ie. One red LED and one audible alarm = ? (How many millivolts/volts of current?)
Two red LED and 2 audible alarm = ? (How many milivolts/volts of current?)
Three = ?
Four = ?
I don’t see this information in the manual or on-line on your site.
Thank you !
Garland Zimmerman
ABYC Certified Tech / NEMA Certified Tech
Hi Garland,
I apologize for the late response. In regards to your question, we do not call out the current for each level of warning as it depends on the conductivity of the water. As for the voltage gradient at each level of warning, please refer to the table on page 12 of the Owner’s Manual. If you have any other questions, please feel free to contact customer service at customerservice@shockalert.com or 844-667-4625 for a fast response.
Thank you,
The Shock Alert Team